?

The Spitfire Site

A Tribute to Britains Finest Fighter

» Forums Home  |  » The Spitfire Site

Welcome, Guest. Please login or register.
Did you miss your activation email?
 
Pages: [1]
  Print  
Author Topic: Wanted : Spitfire Mk XVI-E "bubble canopy" fuselage's bulkheads plan, plz  (Read 3570 times)
Dreamcatcher
Newbie
*
Posts: 1


« on: February 19, 2010, 04:06:09 PM »

Good evening Ladies and Gentlemen,

I plan to build from scratch an electric powered R/C Spitfire Mk XVI-E.
I started to draw my plan but i'm not sure of the real shape of some fuselage's bulkheads, specialy the ones located between the leading edge of the wing and the end of the rear part of the bubble canopy .

I wondered if someone among the specialists of this forum would have plans of these bulkheads and would like to share them with me.

Thank you very much by advance and i beg your pardon for my poor English.

Best regards

D.C.
« Last Edit: February 20, 2010, 02:43:46 AM by Dreamcatcher » Logged
Spits
Jr. Member
**
Posts: 58


« Reply #1 on: March 07, 2010, 01:45:27 PM »

From the datum longeron down all Spitfires are the same.The drawing you need is 35927-17h for a start.It shows a few lines but you might make some headway with it.
Logged
Edgar Brooks
Full Member
***
Posts: 183


Email
« Reply #2 on: March 07, 2010, 05:31:54 PM »

If you go onto My Hobby Store, www.myhobbystore.com, and find your way into the plans section, 2999 will get you a copy of Peter Cooke's drawings for the Griffon-powered Spitfires, which include three cross-sections for the XVIII, from the seat bulkhead aft.
Edgar 
Logged
Pages: [1]
  Print  
 
Jump to:  



Login with username, password and session length