?

The Spitfire Site

A Tribute to Britains Finest Fighter

» Forums Home  |  » The Spitfire Site

Welcome, Guest. Please login or register.
Did you miss your activation email?
 
Pages: [1]
  Print  
Author Topic: Control column  (Read 5046 times)
NateW
Newbie
*
Posts: 22


Email
« on: January 29, 2009, 09:47:34 PM »

Would anyone have dimentional drawings of the botom yolk of the control column?

Thank you,

Nate
Logged
Editor
Administrator
Full Member
*****
Posts: 166



WWW
« Reply #1 on: January 29, 2009, 11:12:20 PM »

Well, they are sure there in Monforton's Spitfire Mk. IX/XVI Engineered...
Hope this helps
/Martin
Logged
Spits
Jr. Member
**
Posts: 58


« Reply #2 on: April 01, 2009, 01:14:34 AM »

Email me Nathan,I might have something... Shocked
Logged
NateW
Newbie
*
Posts: 22


Email
« Reply #3 on: April 08, 2009, 03:21:17 AM »

Hello,

I've been working on various drawings, and could use a little help with the bottom of the control coulmn.
I also can't determine the length of the column tube. I purchaced a casting that isn't usable execpt for
dimensions.
Thanks,
Nathan
Logged
Firebex
Newbie
*
Posts: 2


Email
« Reply #4 on: April 19, 2009, 06:33:59 AM »

Hi

Downland Aviation make all the castings you want in the cockpit area,they make all the kit of bits for the control

column.Also Rudder pedals,trim wheels and the armoured windscreen frame.

Regards

Firebex
MkIX,Mkv,MkII
Logged
NateW
Newbie
*
Posts: 22


Email
« Reply #5 on: April 20, 2009, 04:12:45 AM »

Thank you very much.
I just tried googling them with no luck. Where are they located, or do you know how I could get in contact with them?
Nate
« Last Edit: April 20, 2009, 04:24:13 AM by NateW » Logged
Editor
Administrator
Full Member
*****
Posts: 166



WWW
« Reply #6 on: April 30, 2009, 10:00:10 AM »

Hello,

I've been working on various drawings, and could use a little help with the bottom of the control coulmn.
I also can't determine the length of the column tube. I purchaced a casting that isn't usable execpt for
dimensions.
Thanks,
Nathan

Once again, a book to recommend is Monforton's Spitfire IX/XVI Engineered. It contains complete drawings of the control column and its fittings.
HTH

/M.
Logged
Spits
Jr. Member
**
Posts: 58


« Reply #7 on: May 08, 2009, 01:06:24 AM »

But do the drawings come with complete engineering measurements and material specs?
Logged
Pages: [1]
  Print  
 
Jump to:  



Login with username, password and session length